Browse all practice questions for the Damage Control 313 (DC 313) – Scene Leader Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Damage Control 313 (DC 313) – Scene Leader Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What key information should be communicated in handover briefings between shifts?
  • In demobilization, what is a critical consideration for crew welfare and asset recovery?
  • What items comprise the standard protective gear for Fire, Gas, and Flood responses?
  • Noting damaged bulkheads indicates the need for what action?
  • How does the Scene Leader implement an Incident Command System (ICS) on arrival?
  • Which team would you expect to conduct a focused interior search after primary suppression?
  • Which role is typically responsible for evaluating post-fire damage and determining if further overhaul is needed?
  • What is the Halon time delay duration after activation?
  • Which scenario best indicates that water mist might be inadequate and requires reassessment?
  • What does the assessment team do?
  • What is the Repair Party Manual used for?
  • What is ineffective water mist?
  • What is a general safety precaution to follow during flooding and structural damage operations?
  • Which of the following is not described as a Scene Leader responsibility?
  • Which of the following actions best describes ventilation considerations at a damaged structure scene?
  • Which option lists the correct locations for AFFF hoses?
  • Which term refers to drainage that follows the main drainage?
  • How should PPE be selected for a given damage scenario?
  • Where is positive ventilation used?
  • Structural damage repairs commonly use which materials for shoring?
  • Which factor is NOT listed as influencing the decision to evacuate vs. shelter-in-place?
  • What is the X 50 J used for?
  • What is the expected effect of effective water mist?
  • What is the primary purpose of tracking ICS and units on a scene?
  • In damage control, what is the meaning of 'hot, warm, and cold zones' and how should they be managed?
  • What is the purpose of a 'lessons learned' session, and when should it occur?
  • Distinguish between salvage and overhaul tasks and the Scene Leader's involvement.
  • What does the #1 Rule of Scene Leader emphasize?
  • When debris blocks a primary exit, which action should be completed last before entry resumes?
  • What is the first action the Scene Leader should take in a rising-water scenario?
  • Which triage framework should be used for scene medical management?
  • What are the two types of attack listed?
  • Which action is NOT part of Fire Checklist Part 2?
  • Which statement best describes a primary function of the Collective Protection System?
  • Which statement describes AFFF Groups coverage?
  • How can the Scene Leader promote effective crew resource management (CRM) on scene?
  • Which of the following are indicators of structural compromise that a Scene Leader should watch for?
  • What is span-of-control and why is it important for a Scene Leader?
  • How should a Scene Leader manage fatigue and avoid crew error on long-duration incidents?
  • Where should critical decision points and rationale be attached to support after-action?
  • What are the three core lessons a Scene Leader should remember in every damage control operation?
  • The X-50 J is used as which type of net?
  • Which drainage method relies on gravity to move water with no powered pumping?
  • Which item is part of the Rupture & Structural checklist?
  • What is a key safety consideration when deploying a re-entry team to combat an ineffective fire?
  • How should a Scene Leader address a potential toxic exposure risk to responders?
  • What is the electric submersible pump's GPM at 50' static head?
  • What does SOPV stand for in AFFF activation terminology?
  • What is the difference between command and control in the scene context?
  • Which of the following is NOT a component of radio discipline at a scene?
  • What does the re-entry team do?
  • Which shoring size holds up to 20,000 pounds when fully extended?
  • What is the electric submersible pump's GPM at 70' static head?
  • What measures help minimize risk to responders near a dangerous release?
  • What actions best protect personnel, stabilize the incident, and preserve assets on arrival?
  • Which is the correct order of the five stages of fire from earliest to latest?
  • How should a Scene Leader handle communication with bystanders or civilians?
  • Which of the following best describes the use of visual signals on a multilingual scene?
  • Which of the following best describes the typical sequence of action for a re-entry team and an assessment team during a difficult fire?
  • Peri Jet specifics: what is the discharge size?
  • Which item is NOT typically part of the Scene Leader's documentation responsibilities?
  • Which of the following is a dewatering pump option listed?
  • To maintain safe progress when priorities conflict between teams, what should the Scene Leader do?
  • How many CPS zones are there?
  • In a rising-water scenario, what are essential scene leader actions?
  • How do you ensure accountability of all personnel on scene?
  • Progressive flooding is described as which of the following?
  • Which statement correctly identifies the scope of spaces protected by AFFF on the ship?
  • Which factors influence the decision to evacuate versus shelter-in-place?
  • What is the buffer zone called between the inner and outer smoke boundaries?
  • What is 'cold zone' management and why is it critical to scene safety?
  • What is CMWD used for?
  • How should priorities be communicated to the team to avoid confusion?
  • Which action is most appropriate when water mist proves ineffective during active firefighting?
  • Where is negative ventilation used?
  • Which role does the Scene Leader communicate with?
  • Where is the Scene Leader located relative to the primary boundary?
  • Which term in the list is most clearly a pump model?
  • How many portable dewatering pumps are in the lockers?
  • What does TPZ stand for?
  • Which spaces are covered by the water mist system?
  • Which statement about maintaining situational awareness is most accurate?
  • Which communication practices help Scene Leaders avoid confusion when issuing priorities?
  • Which actions constitute protecting exposures during damage control?
  • What is the primary objective of an overhaul operation?
  • How many people are required to operate a 1 1/2 inch hose?
  • What is the recommended course of action when a primary exit is blocked by debris?
  • What is the maximum suction lift for the electric submersible pump?
  • Which of the following is listed as a method for addressing structural damage?
  • What factors determine the need to call for additional resources?
  • Total flooding is defined as which condition?
  • How is AFFF sprinkling activated on a ship?
  • Which eductor pair is associated with Main 1 near the ladderwell?
  • S-Type specifics: what is the inlet size?
  • Which element best supports maintaining a shared mental model among crew during operations?
  • Which item is a recognized sign of structural damage?
  • What does CPS stand for?
  • What electrical outlet is required to operate the electric submersible pump?
  • What is the P-100 primarily used for?
  • Which item is NOT part of the Fire Checklist Part 1?
  • What should be included in a scene hazard log during initial size-up?
  • Which indicators suggest demobilization planning should be initiated?
  • Which term is used for the drainage option that is not main or gravity-driven?
  • Which documentation forms are typically used in damage control scenes (e.g., incident action plan, risk assessment log, etc.)?
  • Which option is a function of the Rupture & Structural checklist?
  • Which item on the list is a pump model?
  • Pipe jumper hose system is associated with which checklist?
  • Which action best ensures safety concerns are addressed during a handover?
  • Which statement describes AFFF Zones coverage?
  • What is the purpose of pre-incident planning in damage control operations?
  • What is the overarching priority in every damage control operation?
  • Can the electric submersible pump be used on fuel with CO's permission?
  • Under what condition can't the electric submersible pump be used?
  • What are message blanks used for?
  • What is the X 40 J used for?
  • What is the purpose of a hazard log in incident management?
  • In Fire Checklist Part 1, which action involves establishing communication?
  • What is the purpose of a risk assessment in the initial minutes, and what factors are included?
  • What type of gravity draining system is used?
  • What does the re-entry team prioritize when responding to a fire suspected of being difficult to control?
  • What is true about the difference between Conditional protection zones and TPZs?
  • What is the first action a Scene Leader should take upon arriving at a damage scene?
  • How many Secondary drainage system eductors are there?
  • Which class of fire involves electrical fires?
  • What is the recommended action when a flashover occurs?
  • Which statement best describes the role of a liaison with external agencies at the scene?
  • How should repeated equipment failures be addressed?
  • Which statement about positive ventilation is true?
  • What should the Scene Leader capture for documentation and incident reporting?
  • Which radio communication practices help avoid interference at a scene?
  • Describe steps for initial hazard identification during scene size-up.
  • How many people are required to operate a 2 1/2 inch hose?
  • What is the purpose of establishing an Incident Commander, command staff, and branches on arrival?
  • What is the role of the safety officer on the scene?
  • How is Halon activated in the shipboard system?
  • Access Fire space is a step in which checklist?
  • How many Main Draining system eductors are there?
  • Which statement best describes the overall AFFF protection categories?
  • What is the function of a 'recovery plan' after an incident?
  • What is the purpose of a hot zone entry permit?
  • Which system is used to wash down surfaces to remove chemical, biological, and vapor contaminants?
  • The standard protective gear listed for Gas responses includes which set of items?
  • In a negative ventilation setup, which configuration is used?
  • What should be included in an initial risk control plan?
  • How is AFFF delivered via hose reels activated?
  • Which document is primarily used to communicate the incident's immediate plan and resource assignments?
  • If the P-100 needs more lift than 20', what should be used?
  • What does Halon bypass do?
  • How is water mist activated?
  • Which statement best describes the outcome if water mist is ineffective?
  • Which statement describes AFFF hose locations?
  • What happens during a backdraft in a confined space?
  • To maintain clear communications when multiple languages are present, the Scene Leader should...
  • Patch hull penetrations is associated with which checklist?
  • Which of the following items is used as a dewatering pump model?
  • Define the three priorities of damage control and how the Scene Leader applies them on scene.
  • How does a Scene Leader handle conflicting priorities from multiple teams?
  • Which item is NOT part of the Rupture & Structural checklist?
  • What preparation steps should a Scene Leader take for potential collapse?
  • How should a Scene Leader coordinate with external agencies (fire, police, EMS) if present?
  • Which statement describes the role of the assessment team in post-suppression planning?
  • How many P-100s are on the ship?
  • Describe how hazard information should be updated during size-up.
  • When reporting flooding to the repair locker, which measurement is used?
  • In the context of fighting a fire with water mist, what is the expected outcome if the mist is effective?
  • How do you verify that a critical equipment malfunction has been reported and is being addressed?
  • Which option best describes the effect of maintaining positive pressure during ventilation at a damaged structure scene?
  • Which statement best describes the role of the Situation Report (SITREP)?
  • Which of the following is a likely indicator that a fire has not been fully controlled by water mist?
  • Can you dewater a space without permission?
  • Where are the P-100s located?
  • What does asset accountability mean in the recovery phase?
  • Which principle should guide operations to ensure safety during damage control?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy